9101-2196 PCB Keyboard Replacement

Allen Bradley 9101-2196 PCB Board Replacement

Attention

1. Do not operate the terminal if the cable is damaged or pinched. To avoid damaging the cable, do not place the cable over or around sharp objects.
2. Use a soft, damp cloth with 50% water and 50% isopropyl alcohol to clean 9101-2196 PCB Keyboard. Do not use solvents, scouring agents, or scrubbing sponges.
3. Turn off the power supply before you remove the back cover of the terminal. When the back cover is removed, the terminal is sensitive to electrostatic discharge (ESD).
4. Do not use sharp objects, such as a screwdriver, on Allen Bradley 9101-2196 Key Board. Scratching the surface of the keyboard can damage the display and compromise the IP rating.
5. To avoid damage to the operating elements, do not set the terminal on its operating side.
6. To avoid impact damage to 9101-2196 PCB Board, do not set the terminal on unstable surfaces and keep the cable clear of high traffic areas.
7. Help prevent foreign objects or liquids from getting into the terminal. Check 9101-2196 PCB Keyboard regularly. Verify that all screws are firmly tightened and that the housing and cable entrance are not damaged.
8. When the terminal is not in use, hang the terminal on the mounting bracket (ordered separately) or place inside a cabinet or enclosure.

Specifications:

The table below describes the parameters of the Allen Bradley 9101-2196 Key Board.

Related Allen Bradley HMI Part No. :

Allen Bradley Manuals PDF Download: