MPCST11NDJ00T Magelis Front Overlay Touch Membrane
MPCST11NDJ00T Magelis Front Overlay Touch Membrane
| فئات | Magelis Industrial PC |
|---|---|
| علامة تجارية | VICPAS |
| نموذج | MPCST11NDJ00T |
| Touch screen panel type | Resistance touch screen |
| ميناء | Guangzhou, Shenzhen, Hongkong |
| طريقة الدفع | Western Union, T/T, PayPal, Credit Card |
| تنزيل DOC |     |
| وقت تحديث | 2024/4/19 |
Schneider Magelis HMI MPCST11NDJ00T Touch Screen Monitor Protective Film Repair Part
For cabinet installation, it is necessary for the correct sized opening to be cut in the installation MPCST11NDJ00T Front overlay touch panel. The installation gasket and installation fasteners are required when installing the Smart MPCST11NDJ00T Touch screen glass protective film unit. When install the Schneider Magelis Smart MPCST11NDJ00T touch digiziter glass from overlay terminal, we should note that:
Ensure the thickness of the installation panel is from 1.6 to 10 mm (0.06 to 0.39 in).
All panel surfaces used should be strengthened. Due consideration should be given to the product’s weight, especially if high levels of vibration are expected and the product’s installation surface can move. Metal reinforcing strips can be attached to the inside of the panel near the panel cut-out, to increase the strength of the panel.
Ensure all installation tolerances are maintained.
VICPAS supply MPCST11NDJ00T Magelis Schneider Touch screen panel glass and protective film with 365 Days warranty and support Urgent Worldwide Shipping.
Specifications:
The table below describes the parameters of the MPCST11NDJ00T Magelis Schneider Front Overlay Touch Screen.
| Part Number: | MPCST11NDJ00T |
| Display Type: | LCD TFT |
| Screen Diagonal: | 8.4 in |
| Warranty: | 365 Days |
| Product Line: | Magelis Smart Series |
| Terminal Type: | Touchscreen Display |
| Operating Temp.: | 0...50 °C |
| Storage Temp.: | -20...60 °C |
| Display Resolution: | 800 x 600 pixels SVGA |
| Operating System: | Windows XPe SP2 |
Related Magelis Schneider Smart Series Part No. :
| Magelis Smart | Description | Inventory status |
| MPCKT52NAX00B | Schneider Magelis Smart Touch Screen Protective Film Repair | In Stock |
| MPCST11NDJ00T | Magelis Smart Schneider Touch Panel Protective Film Replacement | Available Now |
| MPCST52NAJ20H | Schneider Magelis Smart Touchscreen Protective Film Repair | In Stock |
| MPCST52NDJ00T | Magelis Smart Schneider HMI Touch Screen Glass Protective Film | Available Now |
| MPCST52NDJ10T | Schneider Magelis Smart Touch Screen Panel Front Overlay Repair | In Stock |
| MPCST52NDJ10R | Schneider Magelis Smart Front Overlay Touch Membrane | In Stock |
| MPCST21NDJ20T | Schneider Magelis Smart HMI Touch Glass Front Overlay Repair | In Stock |
| MPCST21NAJ20T | Schneider Magelis Smart Touch Digitizer Glass Overlay Repair | Available Now |
| MPCST52NAJ20T | Schneider Magelis Smart HMI Panel Glass Protective Film | Available Now |
| MPCST11NAJ00T | Magelis Smart Touch Screen Monitor Front Overlay Replacement | In Stock |
| MPCST11NAJ00H | Schneider Magelis Smart MMI Touch Screen Front Overlay | In Stock |
| MPCST52NAN20N | Schneider Magelis Smart HMI Touch Screen Protective Film | In Stock |
| Schneider Magelis | Description | Inventory status |
Schneider Magelis Smart HMI Manuals PDF Download:
FAQ:
Question: How to Wire the Schneider Magelis Smart MPCST11NDJ00T Terminal Block?
Answer: When wiring and connecting the wires, be sure to follow the procedures given below:
1. Remove all power from the Smart 8.4" and confirm that the DC power supply has been disconnected from its power source.
2. Connect the power cord to the terminal block as shown below:
3. Place the terminal block in the power block and tighten the screws. The recommended torque to tighten these screws is 0.5 to 0.6 N•m (4.5 to 5.3 lb-in):
NOTE: The 24 Vdc power supply inside the DC-powered Smart units is protected by an 8 A fuse. This fuse is located inside the power supply and cannot be accessed or replaced by the user.
Question: What is the size of MPCST11NDJ00T Protective Film HMI Panel Glass?
Answer: The Schneider Terminal MPCST11NDJ00T Touch Screen Monitor Front Overlay is 8.4-inch.
Common misspellings:
MPCST11NJ00TPCST11NDJ00T
MPCST11DNJ00T
MPCS711NDJ00T
MPCST111NDJ00T
- هاتف
- *لقب
- *محتوى
اقتباس سريع
اقتباس سريع 
الشحن في جميع أنحاء العالم 
ضمان لمدة 12 شهرًا 
تخصيص الخدمة
- هاتف
- *لقب
- *محتوى
