Fujitsu Touch Screen
-
Series overview
-
More information
-
Select by specs
-
Troubleshooting
-
-
Brand New In Stock
Ships Today
12 Months VICPAS Warranty
Urgent Worldwide ShippingVICPAS supply Fujitsu touch screen panel for repair / replacement. Fujitsu touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by the cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring, dry a cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solution. Watch the edge of the panel when cleaning, again for safety reasons.
-
-
In Stock
-
Suppy Touch Digtizer Glass for Fujitsu Replacement
-
Touch screen Technology: analog resistive
- Available in nine different sizes ranging from 3.8" to 31.5".
-
Superior quality standard 4/5/7 wires resistive analog touch panel
-
-
The Fujitsu Terminals Touch Screen Issues:
Improper calibration
Check for activation points that are offset from touch points. Calibrate the touch screen.
Non-functioning touch screen
Check the touch screen for damage, such as cuts or excessive wear.If there is damage, replace the terminal.
Touching multipleinput elements
Application screens contain graphic input elements that are configured in the Machine Edition application. When touched, these elements perform operations in a predictable manner. For example, an input element is configured to navigate to a specificscreen in the application or start a motor when touched.
Multiple operations cannot be conducted simultaneously. Doing soresults in an unintended operation.
• Do not touch multiple input element simultaneously.
• Do not rest a hand or multiple finger on the display.
| نموذج | وصف | 当前库存 |
|---|
اقتباس سريع
اقتباس سريع 
الشحن في جميع أنحاء العالم 
ضمان لمدة 12 شهرًا 
تخصيص الخدمة
- هاتف
- *لقب
- *محتوى
