Panelview 550
- Series overview
- More information
- Select by specs
- Troubleshooting
-
Brand New In Stock
Ships Today
12 Months VICPAS Warranty
Urgent Worldwide ShippingThe PanelView Standard 550 Graphic Terminals have a 5.5 in. monochrome flat-panel display with 256 x 128 resolution. The touch screen version of the PanelView 550 terminal is available only with 24V DC power. These terminals support operator input via keypad, via touch screen or via keypad with touch screen. VICPAS supply all kind of touchscreen, membrane keyboard keypad and LCD Display for Allen Bradley Panelview 550 HMI Panel replacement.
The most complete Panelview HMI Parts Center
- In Stock
Suppy Touchscreen, Keyboard, LCD Display, and Plastic Case for PanelView 550 terminal Replacement
Touch screen Technology: analog resistive
Display Area (WxH): 120 x 60 mm (4.75 x 2.38 in)
Real-time Clock: Battery-back clock time stamps critical data
Keypad Description Stainless steel domed membrane —Function Keys 10 (F1…F10)
RS-232 Printer Port： 1200, 2400, 9600, 19 200 K
Actuation Rating： Touch 1 000 000 presses
-
How to Install the PanelView 550 Terminalin a Panel?
Follow these step to install the PV550 terminal in a panel.
1. Cut an opening in the panel by using the panel cutout template provided with the terminal and remove any sharp edges or burrs.
2. Make sure the terminal sealing gasket is properly positioned onthe terminal, particularly around the mounting studs as shown.
This gasket forms a compression type seal. Do not use sealingcompounds.
3. On the keypad and keypad and touch screen terminals, securethe ends of the legend strips to the legend strip adhesive.
4. Place the terminal in the panel cutout.
5. Verify that the opening is the proper size to clear the bezel andto allow the gasket to contact the panel.
6. On the keypad and keypad and touch screen terminals, positionthe ends of the legend inserts behind the panel cutout.
7. Install the self-locking nuts hand tight.
8. Alternately tighten the self-locking nuts until the terminal is heldfirmly against the panel.
9. Tighten nuts to a torque of 1.13 Nm (10 lb-in).
10. Remove protective installation label from top vents of terminal
| نموذج | وصف | 当前库存 |
|---|
اقتباس سريع
اقتباس سريع 
الشحن في جميع أنحاء العالم 
ضمان لمدة 12 شهرًا 
تخصيص الخدمة
- هاتف
- *لقب
- *محتوى
